Quang Nam is a key industrial and logistics center in the Central Vietnam economic zone. Chu Lai Open Economic Zone, Ky Ha Deepwater Port, Dien Nam - Dien Ngoc Industrial Park Along with the largest fishing center in Central Vietnam at Nui Thanh, Tam Ky. To the west of the province is the national capital of Ngoc Linh ginseng is found at Ngoc Linh peak (Nam Tra My district).. The construction of the system. Cold storage for seafood exports and storage for precious ginseng in Quang Nam. It is a fundamental factor in enhancing the value of the supply chain.
Tan Long Refrigeration and Electrical Engineering Joint Stock Company To be General contractor for the construction of Tan Long industrial cold storage facility. Reputable, professional construction Chu Lai seafood cold storage and Quang Nam Ngoc Linh ginseng cold storage Meets international quality standards.
1. Key Cold Storage Needs in Quang Nam
- Air-blown freezer and seafood cold storage facility in Nui Thanh, Ky Ha (-20°C to -25°C): Freezing whiteleg shrimp, squid, tuna, and other seafood caught in the Paracel Islands. See solution. seafood cold storage and IQF freezer conveyor.
- Cold storage for Ngoc Linh Ginseng from Nam Tra My (+2°C to +6°C, RH 60%): Preserving all 52 rare saponin compounds of Vietnam's national treasure, ginseng. See more. industrial produce cold storage.
- Food cold storage in Chu Lai Industrial Park, Dien Nam - Dien Ngoc: Providing industrial catering services for THACO's chain of automobile factories and FDI enterprises.
2. Technical Standards for Preservation in Quang Nam Province
| Product | Temperature | Optimum humidity | Storage time |
|---|---|---|---|
| Frozen squid, tuna, and shrimp | -20°C to -25°C | 90% – 95% | 12-18 months |
| Fresh Ngoc Linh Ginseng from Nam Tra My | +2°C to +5°C | 60% – 65% | 6 – 12 months |
| Chu Lai Industrial Zone Food | +2°C to +5°C | 85% – 90% | 30-45 days |
3. Technical Support for Tan Long Refrigeration and Electrical Engineering
- Bitzer (Germany) / Mycom industrial screw compressor unit, high efficiency, energy saving 25%.
- Bark PIR cold storage panel Tan Long 125mm – 150mm thick fire-resistant B1/B2 with tight-fitting joints.
- T-Light cold storage door Heat exchanger gasket prevents ice buildup, durable and aesthetically pleasing.
- The 24/7 SCADA monitoring system provides alerts via phone.
7-Step Process for Surveying and Constructing Cold Storage Facilities in Quang Nam Province
To ensure precise progress and the highest fire safety acceptance standards for industrial construction projects, Tan Long applies a rigorous 7-step EPC general contracting process:
- Step 1 – Receiving and surveying the site within 24 hours: Tan Long's mechanical and electrical engineers personally visited Chu Lai, Nui Thanh, and Nam Tra My to measure ground elevation, 3-phase power supply, and soil characteristics.
- Step 2 – Calculate the thermodynamic cooling load: Using specialized software, we accurately calculate the required refrigeration capacity based on the daily inventory volume, the required temperature range, and the ambient outdoor temperature in Quang Nam.
- Step 3 – Design 2D/3D drawings & combined perspective views: Provide floor plan drawings showing the layout of the panel enclosure, compressor unit location, refrigerant piping, safety valve system, and condensate drain system.
- Step 4 – Component fabrication at Tan Long Factory: We directly manufacture B1/B2 fire-resistant PIR panel enclosures with Camlock fasteners, fabricate T-Light 304 stainless steel sliding/hinged cold storage doors, and assemble PLC control cabinets.
- Step 5 – On-site installation and completion: The team of professional pressure pipe welders proceeded to construct the warehouse shell, install the compressor system, evaporator, and run the control signal wiring.
- Step 6 – Vacuuming, pressure leak testing & refrigerant charging: Test the pressure using dry nitrogen gas at 25-28 bar to ensure there are absolutely no gas leaks before running a cooling load test.
- Step 7 – Acceptance, Handover & Transfer of Operational Technology: Hand over the CO/CQ documents proving the origin of the equipment, instruct technical staff on SCADA operation, and activate the 24/7 warranty mode.
Estimated Costs for Cold Storage Installation in Quang Nam (Reference 2026)
The investment cost for industrial cold storage depends on the storage volume, insulation panel thickness, type of compressor unit (Bitzer, Mycom, Copeland), and automation equipment. Below is a reference cost estimate table categorized by common capacity ranges:
| Store volume (m³) | Cargo capacity | Store in a cool place (+2°C to +8°C) | Freezer storage (-18°C to -22°C) | Recommended computer configuration |
|---|---|---|---|---|
| 30 – 50 m³ | 8 – 15 tons | 65,000,000 – 105,000,000 VND | 110,000,000 – 155,000,000 VND | Bitzer/Copeland 3-5 HP Cluster |
| 100 – 150 m³ | 25 – 45 tons | 130,000,000 – 185,000,000 VND | 195,000,000 – 265,000,000 VND | Bitzer 7.5 – 12 HP unit |
| 300 – 500 m³ | 80 – 150 tons | 350,000,000 – 490,000,000 VND | 490,000,000 – 680,000,000 VND | Bitzer/Mycom 25-40 HP Cluster |
| 1,000 – 5,000 m³ | 300 – 1,500 tons | Custom design survey | Custom design survey | Mycom industrial screw drive systems |
Proof of Tan Long's Capabilities & Featured Projects
With over 20 years of development in Vietnam's industrial HVAC industry, Tan Long proudly serves as a leading EPC general contractor for numerous national-scale projects.
- New Era Cold Storage (NECS) mega-project: With a scale of 102,642 pallet positions, a total cooling capacity of 3 MW, and the application of the Mycom NH3 automated high-rise compression station.
- AJ Total Vietnam Smart Cold Storage Center: The ASRS automated cold storage facility has a capacity of over 30,700 pallets.
- Food processing plant chain: KIDO Foods Complex, Nichirei TBA Logistics, Nutifood Hung Yen, VinaCleanfood Soc Trang.
- Exclusive auxiliary manufacturing plant: Direct sheet manufacturing PIR cold storage panel Fire resistance according to QCVN 06:2022/BXD standard and manufacturing. T-Light cold storage door export standards.
❓ Frequently Asked Questions about Cold Storage Installation in Quang Nam:
1. How long does it take to construct a cold storage facility in Quang Nam?
For small and medium-sized cold storage facilities (30m³ – 200m³), Tan Long completes installation within 5-7 working days. For logistics warehouses of 1,000m³ or more, the implementation time is 25-45 days.
2. Does Tan Long's cold storage panel system meet fire safety inspection standards?
All of Tan Long's insulation panels use a PIR core that prevents fire spread, achieving B1/B2 levels, and have full testing certificates from the Institute of Building Science and Technology (IBST), meeting fire safety inspection standards according to QCVN 06:2022/BXD.
3. What are the warranty and technical support policies in Quang Nam?
Tan Long provides a warranty of 18 to 24 months for the entire system. Our team of engineers is on call 24/7 and is committed to being on-site to resolve issues within 24 hours throughout Quang Nam province.
Cold Storage Survey in Chu Lai, Tam Ky, and Nam Tra My, Quang Nam Province
Tan Long engineers conduct on-site surveys and develop optimal technical solutions within 24 hours.
Cold Storage Construction Project in Adjacent Areas of the Central Coast
The coastal strip boasts deep-water ports, centers for catching and processing tuna, lobster, medicinal herbs, and trans-Asian logistics. Tan Long's engineering team is ready to conduct on-site surveys and provide technical support within 24 hours.
Engineer Nguyen Toan Thinh (Technical Director)
With over 18 years of practical experience in directing, consulting, designing, and constructing heavy industrial refrigeration systems, ASRS automated warehouses, and IQF freezing systems across more than 29 major national projects.
