What is the FDA? FDA standards for storing food & pharmaceuticals

What is the FDA? It stands for the Food and Drug Administration, the United States federal agency responsible for the strict control of the quality and safety of food, pharmaceuticals, cosmetics and medical devices sold on the American market. For Vietnamese businesses with international ambitions, a clear understanding of What is the FDA and of the demanding technical requirements that come with it is the precondition for successfully entering a market of more than 335 million people.

The article below sets out the FDA’s scope, the mandatory technical standards for storage, and the registration process. In particular, we make clear the direct link between FDA rules and compliant cold storage infrastructure, so that businesses can optimise their export supply chain.

What is FDA? FDA standards in food and drug preservation.
 What is the FDA? FDA standards for storing food & pharmaceuticals

Content

What is the FDA? An overview of the U.S. Food and Drug Administration

The FDA (Food and Drug Administration) is an agency of the U.S. Department of Health and Human Services (HHS). To understand What is the FDA, it helps to look back to 1906 and the Pure Food and Drug Act. Today the agency regulates more than 20% of all consumer products in the United States, covering major categories such as food, medicines, vaccines, medical devices and cosmetics.

The FDA’s oversight is not limited to domestically produced goods. Everything imported into U.S. territory falls under its strict control. That means a consignment of frozen shrimp from Cà Mau, pharmaceuticals from Bình Dương or supplements from Hà Nội all have to meet rigorous export standards to enter the U.S. market successfully.

In 2011 the Food Safety Modernization Act (FSMA) significantly widened the agency’s powers. The new rules allow the FDA to inspect plants abroad directly, to recall products that fail to meet requirements, and to require exporting businesses to appoint a U.S. representative to handle legal matters as they arise.

What is the FDA? An overview of the U.S. Food and Drug Administration
 What is the FDA? An overview of the U.S. Food and Drug Administration

The FDA’s scope: which products have to comply?

When researching what the FDA is, businesses need to know which categories of goods fall under the agency’s control so they can prepare both their paperwork and their technical infrastructure. Below are the main product groups that have to comply with U.S. rules:

The FDA’s scope: which products have to comply?
 The FDA’s scope: which products have to comply?

Food and beverages

Food and beverages are the area the FDA watches most closely among imported goods. The group covers frozen seafood, poultry, fruit and vegetables, bottled water and ready-prepared foods.

A practical example: a consignment of frozen basa fillets from Vietnam can only clear customs if the producing facility is registered with the FDA, a HACCP plan is in place, and prior notice is filed at least two working days before each import consignment, as required by 21 CFR Part 1, Subpart I.

Pharmaceuticals and supplements (GSP standard)

The identification what the FDA is in the pharmaceutical industry is always tied to strict safety rules. Prescription medicines, over-the-counter (OTC) medicines and dietary supplements all fall under mandatory oversight.

  • Pharmaceuticals: Strict compliance with cGMP (current Good Manufacturing Practice) is required.
  • Storage facilities: Must meet GSP (Good Storage Practice), holding 15°C to 25°C (59°F to 77°F) for ordinary medicines and 2°C to 8°C (36°F to 46°F) for vaccines and biological products.

Cosmetics and medical devices

Cosmetics generally do not require prior registration with the FDA, but their ingredients and labelling must comply fully with the FD&C Act. For medical devices, from test kits to ultrasound machines, the FDA classifies by three risk levels (Class I, II, III). Depending on the level of risk, a business needs either a 510(k) submission or Premarket Approval (PMA).

Electronic radiation-emitting products

Technology products such as microwave ovens, X-ray machines and laser equipment also fall within this scope. They have to meet the electronic radiation safety standards in 21 CFR Subchapter J before they can be exported to the U.S. market.

Standard What is the FDA? The core technical rules

Mastering the technical rules is the most important step towards passing rigorous U.S. checks. Below are the three main pillars that show what the standards of What is the FDA mean in day-to-day operation:

What are FDA standards? The core technical rules
 What are FDA standards? The core technical rules

Rules on hygiene, safety and product composition

The FDA publishes the list of substances permitted in food through the GRAS list (Generally Recognized As Safe). Every additive, preservative and food colouring must either be on that list or be separately approved by the agency.

Alongside that, limits on pesticide residues, heavy metals and antibiotics in exported seafood are tightly controlled. Testing takes place both at the U.S. border and during on-site audits at the producing plant, to keep food safety and hygiene standards at the highest level.

Rules on labelling and nutrition information

When looking into the requirements of What is the FDA, a business cannot overlook the labelling rules. Labels on goods exported to the United States must show the product name, the ingredient list in descending order of weight, the Nutrition Facts panel (in the FDA’s 2020 format), the net weight, the manufacturer or importer details and the expiry date.

In practice, small labelling mistakes are the leading cause of consignments being held at port (import hold). Following the labelling rules for exported goods is therefore critical to avoiding costly losses.

Requirements for production and storage facilities

Every production facility and storage system has to meet cGMP along with the FSMA PCQI (Preventive Controls Qualified Individual) requirements. For sensitive goods such as seafood or pharmaceuticals, the FDA sets specific technical requirements:

  • Temperature control: Must be monitored continuously with automatic recording devices (data loggers).
  • Record keeping: Operating data must be kept for a minimum of two years.
  • Traceability: A business must be able to trace the information on a specific consignment within four hours of a request from the authorities.

Investing in compliant cold storage does not only answer the question of what What is the FDArequires — it also underwrites product quality as the business moves into wider markets.

Why certification matters and what it brings What is the FDA?

Holding certification from the U.S. Food and Drug Administration brings undeniable strategic advantages. To see the real value of What is the FDA, it is worth looking at three core benefits:

The mandatory "entry ticket" to the U.S. market

The United States is currently the world’s second-largest seafood importer, with total trade worth more than 24 billion USD a year. A business that does not have a firm grip on What is the FDA and lacks this registration will certainly see its consignment held at port, incurring heavy storage costs or facing the risk of being sent back. In practice, FDA registration is a precondition, not a formality, for anyone wanting to reach the U.S. retail network.

Proof of brand credibility and international-standard quality

Holding FDA registration creates a strong competitive advantage not only in the United States but worldwide. Many large importers in Europe, Japan and South Korea use FDA standards as a benchmark for assessing a supplier. When a business can demonstrate compliance with the requirements of What is the FDA, it is in a position to negotiate better prices on the strength of a consistent, transparent quality management system.

Protecting consumers and reducing legal risk

The FDA’s strict rules require a business to build a proper product recall system. That mechanism protects the end consumer and also shields the business itself from litigation or heavy administrative penalties. Note that if one consignment ends up on an import alert, every other product from the same manufacturer can be detained automatically at every U.S. port of entry.

What technical conditions does compliance with what the FDA is require in storage?

To keep exported goods in condition, a clear grasp of the technical standards of what the FDA is in storage and transport is essential. Below are the core requirements for storage infrastructure:

Temperature and humidity standards across the cold chain

The U.S. Food and Drug Administration does not apply a single temperature to all goods. Each product category has its own controlled temperature range to ensure safety.

Temperature and humidity parameters under FDA rules:

Product groupStorage temperatureMaximum humidity
Frozen seafoodminus 18°C to minus 25°C (0°F to minus 13°F)85% or below
Fresh chilled seafood0°C to 4°C (32°F to 39°F)85% to 95%
Ordinary pharmaceuticals15°C to 25°C (59°F to 77°F)60% or below
Vaccines and biological products2°C to 8°C (36°F to 46°F)60% or below
Dietary supplements10°C to 15°C (50°F to 59°F)55% or below

The cold chain has to be maintained unbroken from the plant to the final delivery point. The FDA requires that no temperature excursion exceed 30 minutes at any link in the transport chain.

Temperature and humidity standards across the cold chain
 Temperature and humidity standards across the cold chain

Insulated panel material standards and machine room cleanliness

Storage systems for goods exported to the United States must use compliant cold storage materials such as insulated panels faced with stainless steel or polyester-coated galvanised steel. Common specifications include:

  • Material: PU Panel (polyurethane) có mật độ từ 38 đến 42 kg/m³ với hệ số dẫn nhiệt thấp (λ ≤ 0,022 W/mK).
  • Structure: Wall and ceiling surfaces must have no gap wider than 1 mm, to limit bacterial build-up and to keep cleaning straightforward.
  • Machine room: Must be clean and well ventilated, entirely free of refrigerant leaks, and fitted with a refrigerant alarm system.
  • Stacking rules: Goods must be at least 150 mm (6 inches) from walls and 300 mm (12 inches) from the ceiling so that air circulates evenly.
Insulated panel material standards and machine room cleanliness
 Insulated panel material standards and machine room cleanliness

Automatic data monitoring systems (data loggers)

Going deeper into the technical requirements of what the FDA is, the data recording system is inseparable from the rest. The FDA requires storage facilities to record temperature continuously at intervals of no more than 30 minutes.

That data must be stored electronically for a minimum of two years and be available as a report immediately on request during an audit. Combining an automatic temperature monitoring system with SCADA software lets a business manage the facility remotely and meet the FDA’s demanding 21 CFR Part 11 standard. This is the decisive element in demonstrating the capability of a store holding pharmaceuticals or seafood for export.

Automatic data monitoring systems (data loggers)
 Automatic data monitoring systems (data loggers)

The registration process for what the FDA is to export to the United States?

To complete the formalities for bringing goods into the U.S. market, a business needs a firm grip on the registration process. Understanding the steps of what the FDA is saves time and keeps operating costs down.

What is the FDA registration process for exporting to the United States?
 What is the FDA registration process for exporting to the United States?

Step 1: Prepare the company’s legal documents

This is the most important groundwork. The basic file comprises: the business registration certificate, the food safety certificate issued by the competent Vietnamese authority (the Ministry of Agriculture and Rural Development or the Ministry of Health), the HACCP plan and microbiological test results. The business also needs documents describing the production process and quality control in detail, in English and in the correct format. You may also want to look at the legal documentation required for export so that nothing is missing.

Step 2: Facility registration and facility number

Every food production facility wishing to export to the United States must register with the FDA through FURLS (the FDA Unified Registration and Listing System). Once registration succeeds, the business is issued a Facility Registration Number (FRN). That number has to be declared on every consignment during customs clearance.

Step 3: Appoint a U.S. Agent

Since the FSMA came into force, foreign facilities registering with the FDA must appoint a U.S. Agent (an individual or organisation legally resident in the United States). That representative is the direct point of contact between the FDA and the business for inspection notices, product alerts or requests for further documents. The cost of this service is typically 200 to 500 USD a year depending on the provider.

Step 4: FDA audit and confirmation of eligibility

The FDA may inspect a facility in person or remotely through its records. The areas usually targeted include: raw material storage, finished-goods cold storage, the packing area and the sanitation system.

After passing the inspection, the facility receives an EIR (Establishment Inspection Report) confirming it is eligible to export. One important point when learning about what the FDA is: the agency does not issue a "certificate" in the ordinary sense; successful registration means confirmation that the business complies fully with the rules in force.

How does what the FDA is relate to HACCP and GMP?

In the export industry, the FDA, HACCP and GMP are three layers of control that closely support one another across the supply chain, from production and storage through to arrival at a U.S. port. Understanding what what the FDA is means helps a business see how these standards fit together:

StandardScopePurpose
FDALegal rules (U.S. law)Control of the import market
HACCPHazard analysis systemPreventing contamination in production
GMP/cGMPGood manufacturing practiceEnsuring a consistent production process

In practice, HACCP and GMP are the most important technical foundations for passing a rigorous FDA inspection. A plant without a HACCP system will struggle to meet the FSMA’s preventive control requirements. This is usually the first thing FDA specialists examine when auditing a food facility.

Likewise, GMP is the precondition for pharmaceutical products to be recognised by the FDA as cGMP compliant. These standards working together not only answer the question of what what the FDA isrequires, but also underwrite a business’s reputation internationally.

Tân Long — building FDA-compliant infrastructure alongside your business

With more than 20 years of experience in industrial refrigeration system, Tân Long is a leader in designing and building storage facilities that meet precisely the technical requirements inspectors check during an audit. Understanding what what the FDA is means does not stop at paperwork — it rests on the technical infrastructure being standardised throughout.

Tân Long — building FDA-compliant infrastructure alongside your business
 Tân Long — building FDA-compliant infrastructure alongside your business

Among our featured projects, from the 12,000 MT frozen storage system for Frescol Tuna Vietnam, NH3 refrigeration systems with 08 IQF conveyor for Kyokuyo Vina Foods to the cold store for Lotte F&G Vietnam in Tay Ninh (formerly Long An), Tan Long always delivers engineering solutions to international standards:

  • Insulation materials: PU panels with a density of 38 to 42 kg/m³ faced with stainless steel or premium galvanised steel, for durability and easy cleaning.
  • Temperature control: Modern evaporator systems keeping the temperature difference between zones in the store at ≤ 2°C.
  • Sealing: T-Light cold room doors with fully sealing gaskets, eliminating heat loss.
  • Digitised data: SCADA control panels integrated with data loggers for continuous temperature monitoring, meeting the FDA’s 21 CFR Part 11 record-keeping standard.

This work is the most practical answer to a business’s questions about the infrastructure requirements of what the FDA is. If you need tighter control over storage quality, technical records to support an audit, or an upgrade to an existing cold store, contact Tân Long for detailed advice.

Frequently asked questions about the FDA

How much does FDA registration cost?

Registering a food production facility with the FDA through FURLS is free. The real costs are: the U.S. Agent (200–500 USD a year), translation and preparation of the HACCP file (20–80 million VND depending on scale), product testing to U.S. standards (5–30 million VND per batch), and audit consultancy if specialist support is needed.

FDA standards for food and drug storage.

How long does FDA registration remain valid?

FDA facility registration has to be renewed every two years, in even years (2024, 2026 and so on) between October and December. Miss the renewal and the facility number is cancelled, with every consignment from that facility held at the U.S. port.

Which goods are exempt from FDA registration?

The exempt categories are: food made by an individual and not sold commercially, non-commercial goods carried in personal luggage, and certain alcoholic drinks falling under the TTB (Alcohol and Tobacco Tax and Trade Bureau). Most food, pharmaceutical and medical device goods exported commercially have to comply with the FDA.

What do you do if a product is flagged or refused entry by the FDA?

On receiving import alert or refusal of admission, a business has the right to file a rebuttal (hearing request) within 10 working days, with independent test evidence showing the product meets the standard. If the facility is placed on detention without physical examination (DWPE), the next consignments have to be tested in full and the results submitted before the goods are released. The lasting fix is to correct the root cause — storage infrastructure, production process, temperature control — and ask the FDA to re-inspect.

Frequently asked questions about FDA standards

What is the FDA?

The FDA (Food and Drug Administration) is the United States Food and Drug Administration, the agency responsible for overseeing the safety of food, medicines, medical devices and certain other product groups sold on the U.S. market.

Why should Vietnamese businesses care about the FDA?

Because food, seafood and agricultural goods exported to the United States all have to meet FDA requirements. Fail them and the consignment can be refused entry or held at port.

What are the benefits of meeting FDA requirements?

It opens the door to the U.S. market, raises credibility with other importers, and forces the business to standardise its own internal food safety management system.

What does a refrigeration system have to do with FDA requirements?

Because temperature control is part of the food safety chain. Cold stores and freezing lines have to hold a stable temperature, record the data, use materials that are easy to clean, and be laid out to avoid cross-contamination.

What does Tân Long provide for a plant working towards FDA compliance?

Tân Long designs and builds cold stores and freezing systems with materials and layouts suited to food safety and hygiene requirements, together with temperature monitoring systems that feed the traceability records.

Related pages

Add Sidebar Widgets

Contact consultant

Tan Long's customers