Every year, millions of LCL (less than container load) consignments pass through Vietnam's seaports, playing an extremely important part in the supply chain. Small and medium businesses often face a cost problem, however, if they do not clearly understand what a CFS warehouse is and how it operates. Missing this link not only pushes up the shipping cost but affects the quality of the goods if they are not stored to the correct technical standard.
A CFS (container freight station) is the consolidation point for LCL cargo, where consignments from several different shippers are grouped into one container for export, or broken down for delivery to individual consignees. For food or pharmaceutical goods that need a stable temperature at these transit points in particular, combining CFS infrastructure with a standard cold storage system is the best solution, and the one logistics operators are moving towards today.
This article from Tân Long analyses in detail how a CFS differs from a CY and the demanding technical infrastructure requirements, so a business can control its cargo route as effectively as possible.

What is a CFS warehouse?
CFS Warehouse (Container Freight Station) is a dedicated warehouse inside or near the port area, used to receive and consolidate LCL cargo, stuff it into containers, or strip (unstuff) goods from a container after the ship berths. The CFS warehouse is the central infrastructure for LCL (less than container load) service in international logistics.
Defining the container freight station (CFS)
The container freight station, also called the LCL container station, is a site designated or licensed by the customs authority for gathering, inspecting and stuffing goods into a shared container before export. In the opposite direction, it is where import containers are opened and the goods broken down for delivery to each specific consignee.
Under current Vietnamese regulations, a CFS warehouse operates under the direct supervision of the border-gate Customs Sub-department. All goods stored there are treated as still undergoing customs procedures until clearance is complete.
A practical example: A business in Hà Nội needs to export 500kg of handicrafts to Germany. As the volume is not enough to fill a 20-foot container, the logistics company puts the goods into a CFS warehouse at Hải Phòng port to consolidate them with cargo from five to ten other shippers into one FCL container. This cuts the business's shipping cost to just 30 to 40% of hiring a whole container.

Distinguishing CFS (the warehouse) from CFS (certificate of free sale)
The term CFS in import-export causes frequent confusion because it has two completely different meanings. Misunderstanding it can lead to errors in document preparation:
| Criteria | CFS (Container Freight Station) | CFS (Certificate of Free Sale) |
| Field | Logistics and maritime shipping | Trade and import-export of goods |
| What they actually do | Physical warehousing infrastructure | A legal certificate issued by a state authority |
| Purpose | Consolidating or breaking down LCL cargo into containers | Confirming that goods may be sold freely in the country of origin |
| Authority involved | Customs, port authority | Ministry of Industry and Trade, Ministry of Health |
In this article we focus on the container freight station meaning: the logistics warehousing system.

What kinds of goods does a CFS warehouse store?
A CFS warehouse can take almost any commercial goods, although the technical infrastructure required varies with the nature of the product:
- General cargo: Textiles, footwear, electronic components and handicrafts.
- Dangerous goods: Industrial chemicals, lithium batteries or paint, requiring a separate storage area in strict compliance with the IMDG code.
- Temperature-controlled cargo: Seafood, frozen food and biological pharmaceuticals. This segment requires the CFS warehouse to incorporate a modern industrial cold storage system. At Tân Long we specialise in optimum cold storage design solutions that keep the cold chain unbroken from the CFS warehouse to the end consumer.
- Out-of-gauge cargo: Oversized construction components or machinery, needing an open yard and heavy-duty forklifts to load and unload.
Note: Goods such as explosives, weapons or items prohibited by law may not be stored in an ordinary CFS warehouse.
The role of the CFS warehouse in the supply chain
In logistics, clearly understanding what a CFS warehouse is helps a business see its importance as an irreplaceable connecting link. A CFS warehouse is not merely a temporary storage point but a coordination hub connecting small manufacturers to the global sea freight network. It is also the customs authority's tight control gateway before the official import-export procedures are carried out.
Consolidation and de-consolidation
The core activity at a CFS warehouse revolves around two important technical processes: consolidation and de-consolidation:
- Consolidation: This is the process of gathering several small consignments from different shippers into a single container for export. The service is normally carried out by freight forwarders at the CFS warehouse and is known as LCL consolidation. A 40-foot container, for example, may hold cargo from eight to 12 different shippers, each occupying one to five CBM (cubic metres).
- De-consolidation: On the import side, when a container arrives at the port it is taken to the CFS warehouse to be opened and the goods distributed to each consignee according to the manifest.
For temperature-sensitive goods stored here, installing a high-capacity refrigeration compressor system is mandatory to maintain product quality while the cargo waits to be broken down or consolidated.

Optimising a company's shipping cost through LCL service
Using LCL (less than container load) service is the smart choice for a business with a consignment under 15 CBM or under 15 tonnes. The CFS warehouse is the precondition that makes this service run smoothly and efficiently.
Illustrative cost comparison (Ho Chi Minh City to Hamburg, Germany):
| Shipping method | Cargo volume | Estimated cost | Suitable candidates |
| FCL 20' (full container) | 25 CBM | USD 1,200 to 1,500 | Consignments over 15 CBM |
| LCL through CFS warehouse | 5 CBM | USD 250 to 350 | Small consignments under 15 CBM |
| LCL through CFS warehouse | 10 CBM | USD 480 to 600 | Consignments of 10 to 15 CBM |
Thanks to the CFS warehouse, small and medium businesses can save 40% to 60% on shipping compared with hiring a whole container when they do not have enough cargo to fill one.

Supporting customs inspection and in-depth import-export procedures
The CFS warehouse acts as the customs-designated site for centralised physical inspection of goods. Here the Customs Sub-department carries out the following:
- Checking the goods directly against the customs declaration, including the invoice, packing list and certificate of origin.
- Taking samples for assessment where goods are subject to specialised inspection such as plant quarantine or quality control.
- Supervising the packing and sealing of the container before it leaves.
Concentrating goods at the CFS warehouse shortens clearance to just one to three working days. To ensure technical safety and maintain optimum storage conditions in the inspection area, modern CFS warehouses normally have an automated control cabinet system to keep a close watch on the equipment running in the warehouse.

The cargo handling process at a CFS warehouse in full detail
Understanding the operating process at a what a CFS warehouse is clearly makes a business far more proactive in controlling its schedule and the quality of its goods. Depending on whether the purpose is export or import, the handling process has the following distinct technical steps:
The export process
Mastering the operating process at a what a CFS warehouse is is decisive for how fast goods move and how much risk a business carries. For export flows, companies need to follow these five technical steps closely:
- Step 1: the shipper books and delivers the goods to the CFS warehouse: The shipper or forwarder books with the shipping line, then receives a booking confirmation and the address of the designated CFS warehouse. The goods are transported to the warehouse with a basic set of documents: commercial invoice, packing list and delivery order. The cargo normally has to be at the warehouse two to four days before the estimated time of departure (ETD).
- Step 2: receipt, tallying and warehouse entry: Warehouse staff tally the quantity and measure the weight and volume (CBM) to check against the packing list. All the data is recorded in the WMS warehouse management system. If any shortage or packaging damage is found, the warehouse issues an exception report to notify the shipper immediately.
- Step 3: customs declaration and opening the export declaration: The customs agent files the declaration on the VNACCS/VCIS system. For red-channel cargo, a customs officer inspects it at the warehouse. At that point the CFS warehouse is responsible for providing the inspection area and the labour to open the packages as required.
- Step 4: stuffing the container: Once cleared, the warehouse loads cargo from several shippers into one container according to the stowage plan. For LCL food consignments needing special storage, this process requires close coordination with the cold storage To ensure uninterrupted cold chain supply, Tan Long is currently a leading provider of consulting and services. cold storage construction Integrated for modern logistics centers.
- Step 5: issuing documents and confirming delivery: The warehouse issues the CFS receipt and the cargo manifest. Once sealed, the container moves to the CY yard to wait to be lifted on board.

The detailed import process at a CFS warehouse
Beyond understanding what a CFS warehouse is, importers need to master the handling sequence here in order to protect product quality and minimise the time it takes to receive the goods. The LCL import process normally comprises the following steps:
- Step 1: the container arrives at the port and moves to the CFS warehouse: The LCL container is moved from the CY yard to the CFS warehouse on the shipping line's instruction. The shipper receives an arrival notice from the forwarder in order to prepare the collection formalities.
- Step 2: opening the container and sorting the goods (unstuffing): Warehouse staff strip the cargo and sort it by consignee. To ensure no temperature is lost from chilled cargo during stripping, using standard insulated cold storage door and strip curtain systems is essential. If there is any discrepancy in quantity, the warehouse issues an outturn report as the basis for an insurance claim.
- Step 3: import customs declaration and specialised inspection: The shipper files the import declaration. Some categories such as pharmaceuticals, electronic equipment or food must undergo specialised inspection. This can take three to ten days depending on the specific product.
- Step 4: cargo release to the shipper: Once the CFS charges are settled and the declaration cleared, the warehouse issues a cargo release order. The business can then move the goods to its own warehouse for production or sale.

The difference between a CFS warehouse and a CY (container yard)
The CFS warehouse and the CY (container yard) are usually in the same port area but serve two completely different functions. Confusing the two leads to booking errors and unnecessary charges.
| Criteria | CFS Warehouse (Container Freight Station) | CY (Container Yard) |
|---|---|---|
| Main functions | Consolidation and de-consolidation of LCL cargo | Storing full containers (FCL) before and after they are lifted on board |
| Type of cargo | LCL (less than container load) | FCL (full container load) |
| Who uses it | Small and medium shippers, businesses importing and exporting LCL cargo | Large shippers hiring whole containers, carriers |
| Operating process | Opening containers, tallying each package, loading several shippers' cargo into one container | Receiving full containers, yard storage, issuing the order to lift on board |
| Customs supervision | Customs present in person to inspect LCL cargo | Customs supervise at the gate and by container seal |
| Storage time | Short term: 3–7 days before clearance | Short term: until lifted on board or until the empty container is collected |
| Charges incurred | CFS charges (handling, storage, documentation) | CY charges (demurrage, detention) |
| Typical location | Inside the port or at an ICD (inland container depot) | Seaport container yard, terminal |
A quick rule of thumb: LCL cargo goes through the CFS. FCL cargo goes through the CY. Choosing the wrong type of facility leads to extra charges and delayed clearance.

Common CFS charges in the logistics chain
When researching what a CFS warehouse is, a business needs to understand not only the operating process but the cost structure that arises here. CFS charges are the mandatory costs when goods are handled at a container freight station. They are an indispensable link in the LCL logistics chain. Although these charges are usually fixed, a business can still optimise its budget by understanding how they are calculated:
Handling charge (Lo-Lo)
This charge applies each time technical equipment such as a forklift or crane is used to move goods into or out of the warehouse, or on and off a container in the yard. In Vietnam, the handling charge normally ranges from VND 15,000 to 50,000 per CBM (cubic metre), depending on the warehouse operator's tariff and the nature of the goods.
Storage fee (demurrage)
Goods stored at a CFS warehouse beyond the free time, normally three to five working days, start to incur a storage fee.
- Typical rate: VND 5,000 to 15,000 per CBM per day.
- Technical notes: For smaller shipments of food or pharmaceuticals requiring strict storage conditions, warehousing in standard cold storage systems is crucial. At Tan Long, we provide solutions. cold storage design Specifically designed for logistics centers, it helps ensure stable temperatures and minimizes the risk of damage to goods while awaiting customs clearance.
LCL handling / CFS charge
This is a fixed charge for each LCL consignment handled directly at the warehouse. It covers receipt of the goods, tallying, preparing the manifest and handing the goods over. The charge is normally USD 30 to 80 per consignment depending on whether it is an export or an import.
Documentation fee
This charge covers preparing legal documents such as the cargo receipt and CFS manifest and certifying other related paperwork. A business normally pays USD 10 to 25 for a complete set of documents.
Suppose your business needs to export an LCL consignment of 8 CBM of handicrafts from Ho Chi Minh City to Los Angeles through a CFS warehouse:
| Type of charge | How it is calculated | Estimated amount |
| Handling charge (Lo-Lo) | 30,000 VND x 8 CBM | VND 240,000 (about USD 9.6) |
| CFS LCL handling charge | A fixed charge per consignment | About VND 1,250,000 (USD 50) |
| Documentation fee | Charged per set of documents | About VND 375,000 (USD 15) |
| Storage fee incurred | Two days free (none incurred) | 0 VND |
| Total cost at the CFS warehouse | About VND 1,865,000 (USD 74.6) |
As the table shows, this total is far lower than the difference you would pay hiring a whole container when you do not have enough cargo to fill it. Using LCL service through a CFS warehouse can save a business USD 800 to 1,200 on the same international route.

Technical and infrastructure requirements for building a dedicated CFS warehouse
Building a warehouse to standard demands a thorough understanding of international technical codes. On the question of infrastructure standards for a what a CFS warehouse is, a business needs to recognise that this is not an ordinary storage shed. A CFS's operating performance depends directly on integrated infrastructure design, from floor area and the stuffing and stripping dock system to modern handling equipment. For temperature-sensitive goods in particular, incorporating a compliant industrial refrigeration system is a precondition.
Yard area and the stuffing and stripping dock system
Industrial-standard CFS warehouses in Vietnam are normally built on a large scale, between 3,000 m² and 15,000 m², roughly 0.3 to 1.5 hectares. The clear height must be at least 8m to 10m to give forklifts room to work and make the best use of vertical stacking.
The loading dock system at a CFS warehouse needs to meet the following specifications:
- Number of docks: At least one dock per 300 to 500 m² of warehouse area, so several trucks can load and unload at once.
- Dock height: Set at 1.2m above the warehouse floor, the standard height for connecting directly to 20-foot and 40-foot containers.
- Dock leveller: This equipment bridges the difference between the truck bed and the warehouse floor, preventing damage to goods as forklifts move across.
- Dock shelter: This keeps rain and direct sunlight out of the warehouse during loading, which matters particularly for perishable goods.
In addition, the warehouse floor must carry at least 3 to 5 tonnes/m² and have a well-planned drainage system. Modern CFS warehouses all use a WMS warehouse management system connected directly to VNACCS customs data to track cargo location in real time.

Applying refrigeration in industrial CFS infrastructure
When a CFS warehouse handles temperature-controlled categories such as frozen seafood, processed food, biological pharmaceuticals or vaccines, installing an industrial refrigeration system is mandatory. Depending on the nature of the goods, a refrigerated CFS warehouse is divided into different temperature zones:
Temperature zones in a refrigerated CFS warehouse:
| Storage zone | Operating temperature | Typical goods | Panel thickness |
|---|---|---|---|
| Chilled room | 0°C to 4°C (32°F–39°F) | Fresh seafood, fruit and vegetables, pharmaceuticals | 75–100 mm |
| Frozen store | −18°C to −25°C (0°F to −13°F) | Shrimp, frozen fish, processed meat | 100–150 mm |
| Blast freeze room | −35°C to −45°C (−31°F to −49°F) | Export seafood, IQF products | 150–200 mm |

Core technical requirements for a CFS refrigeration system
The refrigeration system installed in a dedicated CFS warehouse needs careful calculation of capacity and equipment:
- Refrigerant: NH3 (ammonia) is preferred for large systems above 500 kW for its high efficiency and a 20% to 30% saving in running costs. For a small CFS warehouse, refrigerants such as R404A or R507 are the suitable choice.
- Refrigeration compressor: Use screw refrigeration compressors for warehouses over 1,000 m² and piston compressors for smaller ones. Tân Long normally recommends respected brands such as Bitzer, Mycom or Copeland for durability.
- Unit cooler: Use industrial refrigeration of the herringbone type for the frozen area and centrifugal-fan coolers for the chill area. The installation spacing must give even air circulation, with a temperature variation between zones of no more than 2°C.
- Monitoring and control: The system needs a smart control panel with continuous 24/7 temperature logging, so reports can be produced as customs and overseas partners require.

With more than 15 years designing and building industrial cold stores nationwide, Tân Long is proud to offer a complete solution for CFS warehouse infrastructure. We have successfully delivered major projects for companies such as Kyokuyo Vina Foods, C.P. Vietnam and Frescol Tuna Vietnam.
In short, to understand fully what a CFS warehouse is, a business should see it as a complex logistics hub where the goods of dozens of companies converge, are controlled and are stored to the most demanding technical standards before reaching the global market.
Mastering the CFS process, the CFS cost structure and the difference between CFS and CY lets a business control its logistics costs proactively, avoid unnecessary charges and speed up clearance.

For temperature-controlled goods — seafood, frozen food, pharmaceuticals — a refrigeration system in the CFS warehouse is an unavoidable requirement for delivering quality goods to the consignee. Tan Long provides complete industrial refrigeration solutions for CFS warehouses, seafood processing plants and the cold chain, from technical design through installation to long-term maintenance.
Contact Tân Long for free technical advice:
- Hotline: (+84) 908 895 679 – Mr. Chinh | (+84) 982 330 357 – Mr. Sang
- E-mail: info@tanlongvn.com
- Website: tanlongvn.com
- Address: 86 Đồng Đen, Tân Bình Ward, Ho Chi Minh City
Answers to common questions
What is the maximum storage period at a CFS warehouse?
Free storage time at a CFS warehouse is normally 3–7 working days, counted from the day the goods enter the warehouse (for exports) or from the day the container is unstuffed (for imports). After that, a storage fee accrues daily.
Some CFS warehouses at Cát Lái port (Ho Chi Minh City) and Hải Phòng port allow five days' free time for ordinary cargo, cut to three days for dangerous goods. Cargo held for specialised inspection (quarantine, import quality control) still incurs storage fees even though the shipper is not at fault, so the inspection paperwork should be prepared before the goods reach the port.
There is no fixed legal limit on maximum storage, but cargo left more than 30 days with no action can be treated by customs under the rules on abandoned goods.

Goods damaged at a CFS warehouse: who is responsible?
Responsibility depends on when the damage occurred and what caused it:
- Damage before delivery into the warehouse: The shipper is responsible. The warehouse issues an exception report on receipt, recording the condition of the packaging.
- Damage during storage or handling: The CFS warehouse is responsible under the service contract. The warehouse must carry warehouse liability insurance.
- Damage from natural disaster or force majeure: Both parties refer to the force majeure clause in the contract.
- Damage arising during the sea voyage: The shipping line is responsible under the bill of lading and the Hague-Visby Rules.
The shipper should ask the warehouse for an outturn report as soon as anything unusual is found and notify the cargo insurer within 3–7 days as the policy requires (ICC A, B or C).
Is it difficult to obtain a certificate of free sale (CFS) for goods?
A certificate of free sale (CFS) is a document completely different from a CFS warehouse. It is a legal document confirming that a product may lawfully be sold in Vietnam, normally required for exports of food, cosmetics and pharmaceuticals.
Applying for a CFS in Vietnam (2026):
- Issuing authority: The Ministry of Industry and Trade (for industrial and consumer goods), the Ministry of Health (for supplements, pharmaceuticals and cosmetics), the Ministry of Agriculture (for agricultural produce and seafood).
- Basic file: An application, the business registration certificate, product technical documentation and test results.
- Processing time: 5–15 working days depending on the ministry.
- Validity: One to two years depending on the product type.
How straightforward it is depends mainly on the product type and how complete the file is. Filing online through the National Public Service Portal shortens the processing time.
Frequently asked questions about CFS warehouses
What is a CFS warehouse?
A CFS warehouse (container freight station) is the consolidation point for LCL cargo, where consignments from several different shippers are grouped into one container for export, or broken down for delivery to each consignee on import.
Are the CFS warehouse and the CFS certificate the same thing?
No. These are two different concepts sharing one abbreviation. CFS in this article is the LCL consolidation warehouse, while CFS in import-export is also used for a product's certificate of free sale.
What goods are stored at a CFS warehouse?
Mainly LCL cargo: consignments without enough volume to fill a container of their own. The goods are gathered at the warehouse, sorted, then consolidated or broken down by sailing.
How does consolidating LCL cargo at a CFS warehouse save money?
Instead of each business hiring a whole container, several small consignments are combined into one. The shipping cost is therefore shared between the shippers, which suits small and medium businesses.
Can customs procedures be carried out at a CFS warehouse?
Yes. The CFS warehouse is where customs inspect the goods and businesses complete their import-export formalities before the cargo is loaded on board or handed to the consignee.
Related pages
- Common cold storage errors and effective solutions
- Standard cold storage installation process from AZ
- Panel sizes of the latest standard types today
- What are cold storage materials? Instructions on how to choose cold storage materials
- Tan Long industrial cold storage
- Logistics cold storage: the multi-temperature model for distribution centres




































